Monday, July 15, 2024
Home Logistics News Fire safety management system I am a carton factory. Is there a fire safety management system for the carton factory?

Fire safety management system I am a carton factory. Is there a fire safety management system for the carton factory?

by admin
0 comment

establish a variety of fire safety education systems for all employees every year

to improve their fire safety awareness
2. Regularly organize employees to learn fire laws and regulations and various rules and regulations to manage fire according to law
3. Each department shall carry out fire safety education and training according to the characteristics of the post
4. Field demonstration and training should be conducted for the maintenance and use personnel of fire-fighting facilities
5. Conduct pre job fire training for new employees, and only after passing the examination can they take the post
6. Due to work needs, employees must undergo re education and training before changing posts
7. Special posts such as fire control center shall receive professional training, pass the examination and work with certificates

(II) fire inspection and inspection system
1. Implement the level by level fire safety responsibility system and post fire safety responsibility system, and implement the inspection and inspection system
2. The fire protection work is under the centralized management of the functional department, which carries out fire inspection on the company every day. Conduct fire prevention inspection for the unit once a month, recheck and track the improvement
3. If fire hazards are found during the inspection, the inspector shall fill in the fire inspection record and require relevant personnel to sign the record according to the regulations
4. The inspection department shall timely notify the inspected Department of the inspection situation, and the person in charge of each department shall notify the fire safety inspection situation every day. If it is found that there is a potential fire hazard in the unit, it shall be rectified in time
5. If the fire hazards found in the inspection are not rectified in time according to the specified time, they shall be punished according to the reward and punishment system

(III) management system of safety evacuation facilities
1. The unit shall keep the evacuation passage and emergency exit unblocked. It is strictly prohibited to occupy the evacuation passage, and it is strictly prohibited to install fences and other obstacles affecting evacuation on the emergency exit or evacuation passage
2. Fire safety evacuation indication signs and emergency lighting facilities in accordance with national regulations shall be set according to specifications
3. Keep fire doors, fire safety evacuation signs, emergency lighting, mechanical smoke exhaust and air supply, fire accident broadcasting and other facilities in normal condition, and regularly organize inspection, testing, maintenance and maintenance
4. It is strictly forbidden to lock the emergency exit during business or work
5. It is strictly prohibited to close, block or cover the safety evacuation indication signs during business or work

banner

(IV) management system of fire control center
1. Be familiar with and master the performance of various fire-fighting facilities to ensure orderly, accurate and rapid operation in the process of fire fighting
2. Make fire duty records and shift handover records, and handle fire alarm calls
3. Hand over the shift on time and complete the handover procedures of duty records, equipment conditions, accident handling, etc. Personnel on duty are not allowed to leave their posts without shift handover procedures
4. In case of equipment failure, report it in time and notify relevant departments to repair it in time
5. The internal telephone of the fire control center shall not be used for non work needs, and the personnel not on duty in the fire control center are not allowed to enter the duty room
6. Smoking, sleeping, reading books and newspapers are not allowed in the fire control center during working hours. Shift handover procedures should be completed when leaving the post
7. In case of fire, deal with it immediately according to the fire fighting plan, call 119 to inform the public security fire department and report to the Department Director

(V) maintenance and management system of fire-fighting facilities and equipment
1. The full-time administrator is responsible for the daily use management of fire-fighting facilities. The full-time administrator checks the use of fire-fighting facilities every day to keep the facilities clean, hygienic and intact

2. The centralized management department of fire protection shall be responsible for the maintenance and regular technical testing of the technical performance of fire-fighting facilities and fire-fighting equipment, and a full-time administrator shall be appointed to check and understand the operation of fire-fighting equipment on time every day. Check the operation records, listen to the opinions of the personnel on duty, and timely arrange maintenance in case of abnormalities, so as to keep the equipment in good technical condition
3. Regular testing of fire-fighting facilities and equipment:
(1) the testing of smoke and temperature sensing alarm system shall be organized and implemented by the centralized management department of fire protection, with the participation of the security department. Each smoke and temperature sensing probe shall be tested in turn at least once a year
(2) try to start the fire pump, spray pump and water curtain pump once a month to check whether they are complete and easy to use
(3) the positive pressure air supply and smoke control system shall be tested once every six months
(4) indoor fire hydrant and spray water discharge test shall be conducted once a quarter
(5) for the test of other fire-fighting equipment, the test time shall be determined according to different conditions
4. Fire fighting equipment management:
(1) conduct general survey and dressing change of fire extinguishers twice a year during winter and summer prevention
(2) assign special personnel to manage and inspect the fire-fighting equipment regularly to ensure that it is in good condition
(3) the fire-fighting equipment should be checked frequently. If it is lost or damaged, it should be supplemented immediately and reported to the leader
(4) the fire-fighting equipment of each department shall be managed by the Department and a special person shall be appointed to take charge of it

(VI) fire hazard rectification system
1. All departments shall eliminate the existing fire hazards in time
2. During the fire safety inspection, the fire hazards found shall be registered item by item, and the hidden dangers shall be issued to all departments in writing for rectification within a time limit. At the same time, the hidden dangers rectification records shall be made
3. Before the fire hazards are eliminated, all departments shall implement preventive measures to ensure fire safety during the rectification of hidden dangers. For major fire hazards that cannot be solved, they shall put forward solutions, timely report to the person in charge of fire safety of the unit, and report to the superior competent department of the unit or the local government
4. For the fire hazards ordered by the public security fire control institution to correct within a specified time limit, it shall correct within the specified time limit, write the reply to the rectification of the hazards, and submit it to the public security fire control institution

(VII) fire and power safety management system
1. Power safety management:
(1) it is strictly prohibited to set up wires at will and overload power consumption
(2) the installation of electrical lines and equipment shall be the responsibility of licensed electricians
(3) all departments should turn off the power supply after work
(4) private use of electric heating rods, electric furnaces and other high-power appliances is prohibited
2. Fire safety management:
(1) strictly implement the hot work approval system. When hot work is really nec
essary, the operation unit shall apply for “hot work permit” to the centralized management department of fire work according to the regulations
(2) before hot work, the inflammable and explosive dangerous goods within 5m around the hot work point shall be removed or properly isolated, and the appropriate type and quantity of fire-fighting equipment shall be borrowed from the security department for standby at any time. It shall be returned immediately after the operation. If it is used, it shall be reported truthfully
(3) if the construction is carried out on the ground fire at the operation site, the application shall be made to the supervisor at or above the manager level of the unit where the operation site is located according to the regulations. The application department shall send personnel to supervise the site and patrol from time to time. For elevated hot work more than 2 meters above the ground, one person must be responsible for extinguishing sparks that may ignite other items at any time
(4) if a hot work operator does not apply for a “hot work permit”, the personnel of the unit will be punished twice with a minor demerit, and those who are serious will be dismissed

(VIII) fire and explosion prevention system for inflammable and explosive dangerous goods and places
1. Inflammable and explosive dangerous goods shall have a special warehouse equipped with necessary fire-fighting equipment and facilities, and the warehouse keeper must be a person qualified in fire safety training
2. Inflammable and explosive dangerous goods should be stored by category and item. Inflammable and explosive chemicals with conflicting chemical properties or different fire extinguishing methods shall be stored in separate warehouses
3. Inflammable and explosive dangerous goods shall be inspected by the inspection department before warehousing, and they shall be registered in and out of the warehouse
4. The inventory items shall be stored by classification and in stacks. The floor area of each stack shall not be greater than 100 square meters, the distance between stacks shall not be less than one meter, the distance between stacks and walls shall not be less than 0.5 meters, the distance between stacks and beams and columns shall not be less than 0.5 meters, and the width of main passages shall not be less than 2 meters
5. The access of inflammable and explosive dangerous goods shall be carried out in accordance with the safety operation procedures. The warehouse staff shall stick to their posts, and non staff shall not enter at will
6. Fire and explosion prevention measures shall be taken in flammable and explosive places according to the requirements of fire protection specifications, and the maintenance of fire and explosion-proof facilities shall be well done

(IX) organization and management system of volunteer fire brigade
1. Volunteer firefighters shall carry out business learning and fire fighting skill training under the leadership of the centralized management department of fire work, and all technical assessments shall meet the specified indicators
2. In combination with the maintenance and inspection of fire-fighting facilities, equipment and equipment, we should carry out rotation training for each volunteer firefighter in a planned way, so that everyone has practical operation skills
3. Drill once every six months according to the fire fighting and emergency evacuation plan, and constantly improve the plan in combination with the actual situation
4. The assessment of fire prevention and extinguishing knowledge shall be held once a year, and the outstanding ones shall be commended
5. Constantly sum up experience and improve the ability of fire prevention and self rescue

(x) fire fighting and emergency evacuation plan drill system
1. Formulate fire fighting and emergency evacuation plans in line with the actual situation of the unit
2. Organize all staff to learn and be familiar with fire fighting and emergency evacuation plans
3. Before each plan drill, a meeting should be held carefully to make arrangements and clarify the division of labor
the drill shall be conducted at least once every six months according to the plan
5. After the drill, a comment meeting should be held to carefully summarize the situation of the plan drill, and the plan should be modified and improved in time if deficiencies are found

(XI) inspection and management system of gas and electrical equipment
1. Electrical equipment shall be installed and used correctly according to regulations. Relevant personnel must receive necessary training and obtain valid certificates issued by relevant departments before operation. All kinds of equipment must have valid certificates of conformity stipulated by laws and regulations and can be put into use only after being confirmed by the maintenance department. Electrical equipment shall be inspected regularly by licensed personnel (at least once a month)
2. Lightning protection and anti-static facilities shall be inspected and tested regularly, at least once a quarter and at least once a year, and recorded
3. The load of electrical equipment shall be carried out in strict accordance with the standards, with firm joints, good insulation, qualified and normal safety devices and good grounding. The grounding resistance shall be tested in strict accordance with the electrical construction requirements
4. All kinds of lines should be isolated by sleeves. In special cases, lead or rubber cables with good insulation should also be used. All kinds of electrical equipment and lines shall be overhauled regularly to eliminate potential fire safety hazards caused by insulation damage at any time
5. It is forbidden to lengthen the wire without approval. All departments shall actively cooperate with the safety team and the personnel of the maintenance department to check whether the extension wire is only for emergency use, whether the shell is intact and whether it is put into use after being tested by the personnel of the maintenance department
6. The yellow area near the lines of electrical equipment and switch box shall be delimited according to the standards of the unit. It is strictly prohibited to stack inflammables and explosives, and regularly check and eliminate hidden dangers
7. Cut off the power supply after using the equipment. not

You may also like

Leave a Comment

Soledad is the Best Newspaper and Magazine WordPress Theme with tons of options and demos ready to import. This theme is perfect for blogs and excellent for online stores, news, magazine or review sites.

Buy Soledad now!

Edtior's Picks

Latest Articles

u00a92022u00a0Soledad.u00a0All Right Reserved. Designed and Developed byu00a0Penci Design.