Tuesday, May 28, 2024
Home Logistics News High frequency fuse of high frequency

High frequency fuse of high frequency

by admin
0 comment

the machine has two slide positions. The operator only needs to put in the product, press the slide forward button, the machine head will automatically drop, heat and rise, and the slide exits to complete all the simple operation processes. The staff can use the machine without special training; Output force adjustment: the coaxial oscillator with unique low loss is used to adjust the output force at any time due to the size of the mold and the thickness of the rubber, so that the high-frequency machine will not interfere with the telecommunications when operating. It is not comparable with other brands. The output adjustment can also be coordinated with the time system, which can fuse the product in the shortest time with the maximum output to improve the production capacity; Protection device: current limiting protection: when the output force is adjusted too large, the high cycle output will be cut off, so the electronic tube in the machine can be protected from damage due to excessive current
⑴ spark protection: during the working process, if the mold has a fire jump, the protector will cut off the output, and the mold will automatically rise and leave the production
products, so that the mold will not be damaged due to fire jump
⑵ tightening: during the working process, the high-frequency wave output can be stopped at any time and the mold returns to its original position. The main high-frequency machines include: single head push disc high-frequency machine, single head rotary disc high-frequency machine, double head oil pressure high-frequency machine, double head air pressure high-frequency machine, high-frequency synchronous fuse, non elevation high-frequency machine, etc
⑴ spark suppressor: when sparks are generated, the machine is equipped with a special electronic circuit, which can automatically cut off the high-frequency suppression spark, so as to minimize the damage to the mold and materials. At the same time, the warning light is also on
⑵ radio wave interference avoidance device: it is equipped with a high-frequency high-frequency stable and high-frequency magnetic flux leakage damper, which can avoid radio wave leakage from interfering with other electronic devices, such as television
⑶ safety device: when the current exceeds the limit value, the overload current relay automatically protects the oscillation tube and rectifier. When the mechanical cooling is insufficient, it can automatically cut off the power supply and avoid accidents caused by improper operation
⑷ special mechanical structure: each model has been specially designed and assembled, and its strength is enough to cope with any situation. The base will never shake, and the special parts are very light and accurate to use
(5) easily adjustable synchronizer and special circuit: the high cycle power output is very strong, which can be adjusted according to the mold size and material thickness by the adjuster. Especially, the special high cycle circuit has high stable output and strong output rate, which can greatly reduce the necessary welding time and improve the product quality and output. Power: 5-8kw
upper pressing plate: 400*520mm lower pressing plate: 400*600mm
distance between upper and lower electrodes: 150mm
features of the whole machine: PVC, PU, TPU hot pressing, branding, and hot pressing are completed simultaneously
purpose:
1. Fuse the cardboard and blister (toothbrush packaging)
2. Fuse the synthetic leather products at the same time
3. Fuse the synthetic leather chair, sun visor, door panel armrest, etc.
4. Fuse the lining material at the same time.
5. Footwear accessories, Trademark, watch belt, belt, CD bag, etc.
product introduction:
the high-power high-frequency machine uses the high-voltage rectifier self-excited electron tube to generate an electromagnetic field to change the plastic molecules. Under the action of external pressure and mold, it can achieve the effects of welding, cutting, sealing, planting, etc; The operation is easy to understand and learn. The efficiency is multiple times that of ordinary small machines. It is suitable for welding and cutting large plastic products. The process is simpler and the effect is more perfect
product features:
pneumatic control, simple and convenient operation; Manual discharging and reclaiming; Perfect and fast welding and cutting, high efficiency and good process; It is suitable for welding and cutting of large inflatable toys, car mats, sporting goods and other products

You may also like

Leave a Comment

Soledad is the Best Newspaper and Magazine WordPress Theme with tons of options and demos ready to import. This theme is perfect for blogs and excellent for online stores, news, magazine or review sites.

Buy Soledad now!

Edtior's Picks

Latest Articles

u00a92022u00a0Soledad.u00a0All Right Reserved. Designed and Developed byu00a0Penci Design.